These forums are a place for learning, helping and sharing experiences with others about any of our products. Feel free to ask a question and get answers from our community and our most advanced users.
Note that these are public forums - anyone can view the discussions here.
VISIT OUR DIFFERENT FORUMS:
Announcements > | |
CloudShell > | TestShell > |
Developers > | BI (Business Inteligence) > |
This is where you can suggest your ideas to help and improve the product for everyone.
Please make sure to read the following article before posting a new idea, to get more information about the required information and ideas lifecycle.
Feel free to vote and comment on other ideas to promote them.
Thanks for everyone who suggested the ideas and voted for them.
Find, download and share integrations that can extend and enhance the CloudShell experience.
Integrations have several levels:
Certified - Officially tested and supported by Quali.
Preview - Provides a sneak peek to what the Quali team is developing. Officially supported by Quali. Feel free to experiment and comment, but please take into consideration that it is not yet tested and released.
Community - Integrations shared by community users. Feel free to look into what other users have contributed, please take into consideration that these integrations are not tested by Quali.
To learn more about creating Shells and integrating with CloudShell, use the following links:
CloudShell's Dev Guide > | Configuration Management > |
Getting started with Shells > | Extending CloudShell with Cloud Providers > |
Getting started with Orchestration > | API Guide > |
To share your integration, follow the instructions in this guide >.
lets say I'm building a measure "measure2" in a transformation "trans1". can I use other measure "measure 1" from the same transformation?
for example: I want to take the value from "measure1" in order to search its value inside the "measure2" -both of them from "trans1" transformation.
Answer by Oriel Belzer · Oct 17, 2012 at 08:00 AM
Dear Gilad,
What you are asking to do can be done easily using the Transform tool.
Let's start with adding 1 Transform tool named "Transform3" and to this Transform we will add one Measurement called "Measurement1". In this Measurement we will define the value we would like to search for, for example in the below screenshot I defined the Measurement1 to be the string "www" :
Now all you should do in order to work with "Measuremen1" to search you should add another Measurement and to use the "find" library with the "Measuremen1" results, just make sure you use the full "path" to the "Measuremen1" result, which in this case should be {Transform3.Measurement1}, see screenshot below:
Please let me know if it helps and if you have any further questions.
Thanks,
Oriel Belzer
Answer by Oriel Belzer · Oct 17, 2012 at 10:12 AM
Hi Gilad,
Seems like the second screenshot is missing in my first comment.
Please find below the second screenshot:
Thanks,
Oriel Belzer
Answer by Oriel Belzer · Oct 17, 2012 at 12:27 PM
Hi,
You can definitely use the " transform3.measurement1" as a source of the second measurement, see screenshot below:
Hope it helps.
Thanks,
Oriel Belzer
Answer by Oriel Belzer · Oct 17, 2012 at 02:07 PM
Yes, I just ran the transformation and it's working.
Please try again and in case you are facing any error please let me know what is the error and if you can add a screenshot it will be great.
Thanks,
Oriel Belzer
Answer by Quali · Oct 24, 2012 at 04:58 PM
ok
it worked.
I just need to write the sources correct-first to add a new source and then to add a measure connected to it.
when I changed the source after adding a measure,it changed the source for all the previous measures...
Answer by Oriel Belzer · Oct 25, 2012 at 07:20 AM
Great news ! Thanks for the update and good luck with creating your tests !
Oriel.
These forums are a place for learning, helping and sharing experiences with others about any of our products. Feel free to ask a question and get answers from our community and our most advanced users.
Note that these are public forums - anyone can view the discussions here.
Announcements | |
CloudShell | TestShell |
Developers | BI (Business Inteligence) |
This is where you can suggest your ideas to help and improve the product for everyone.
Please make sure to read the following article before posting a new idea, to get more information about the required information and ideas lifecycle.
Feel free to vote and comment on other ideas to promote them.
Thanks for everyone who suggested the ideas and voted for them.
Find, download and share integrations that can extend and enhance the CloudShell experience.
Integrations have several levels:
Certified - Officially tested and supported by Quali.
Preview - Provides a sneak peek to what the Quali team is developing. Officially supported by Quali. Feel free to experiment and comment, but please take into consideration that it is not yet tested and released.
Community - Integrations shared by community users. Feel free to look into what other users have contributed, please take into consideration that these integrations are not tested by Quali.
To learn more about creating Shells and integrating with CloudShell, use the following links:
CloudShell's Dev Guide | Configuration Management |
Getting started with Shells | Extending CloudShell with Cloud Providers |
Getting started with Orchestration | API Guide |
To share your integration, follow the instructions in this guide.
Using RegEx in XML transformation 3 Answers
Reserve a topology through TeshShell Studio as current user 5 Answers
IxNetwork - Interacting with embedded Test Composer Scripts 1 Answer
Test shell runner error: object reference not set to an instance of an object 2 Answers
performing calculation on matrix cells using transformations 1 Answer